Invens Royal R6 Flash File Lcd Fix 2Nd Update Firmware Stock Rom Sp7731
LINK ---> https://urlin.us/2ttWQJ
How to Flash Invens Royal R6 with LCD Fix 2nd Update Firmware Stock Rom SP7731
If you are looking for a way to flash your Invens Royal R6 smartphone with the latest LCD fix 2nd update firmware stock rom SP7731, then you have come to the right place. In this article, we will show you how to download and install the Invens Royal R6 flash file on your device using the SPD flash tool. This will help you to fix any software-related issues, such as bootloop, IMEI problems, lagging, battery drain, etc. on your Invens Royal R6 device.
What is Invens Royal R6 Flash File
Invens Royal R6 flash file is a firmware package that contains the original Invens USB driver, flash tool, and the firmware file itself. The firmware file is a zip file that has the .pac extension and can be flashed using the SPD flash tool. The firmware file contains the operating system and other software components that run on your Invens Royal R6 device.
Why do you need to flash Invens Royal R6
There are many reasons why you may need to flash your Invens Royal R6 device with the latest firmware stock rom. Some of them are:
To upgrade or downgrade your Invens Royal R6 device to a newer or older Android version.
To fix any software-related issues that may occur on your Invens Royal R6 device, such as bootloop, IMEI problems, lagging, battery drain, etc.
To unbrick your Invens Royal R6 device if it is stuck on the logo screen or does not boot up.
To restore your Invens Royal R6 device to its factory settings and remove any customizations or modifications that you may have done.
To improve the performance and stability of your Invens Royal R6 device.
How to download Invens Royal R6 Flash File
To download the Invens Royal R6 flash file, you need to follow these steps:
Go to https://firmwarecare.com/invens-royal-r6 [^2^] and click on the "Get Link" button.
You will be redirected to another page where you need to wait for a few seconds and then click on the "Download" button.
The download will start automatically and you will get a zip file named "Invens_Royal_R6_V09_20171102_5.1_SPD.zip".
Save the zip file on your computer and extract it using any zip extractor software.
You will get four files inside the extracted folder: the firmware file (Invens_Royal_R6_V09_20171102_5.1_SPD.pac), the USB driver (SCI-android-usb-driver-jungo-v4), the flash tool (SPD_Upgrade_Tool_R4.0.0001), and a how-to flash guide (How To Flash.txt).
How to install Invens Royal R6 Flash File
To install the Invens Royal R6 flash file on your device, you need to follow these steps:
Install the USB driver on your computer by running the SCI-android-usb-driver-jungo-v4.exe file as an administrator.
Open the flash tool folder and run the UpgradeDownload.exe file as an administrator.
Click on the "Load Packet" button and browse to the firmware file (Invens_Royal_R6_V09_20171102_5.1_SPD.pac) that you have extracted earlier.
Click on the "Start Downloading" button and wait for the flash tool to load the firmware file.
Turn off your Invens Royal R6 device and remove the battery (if removable).
Press and hold the volume down key and connect your device to the computer using a USB cable. 248dff8e21